Print document
 28 of 47 
 
J
                                   
065
JETTIES
Jetties are a common term for river wharfs made timber, steel or a combination
            of both.                  
Painting:
After proper surface preparation
Portion under water:
2 coats of Epilux 5 Coal tar Epoxy
Splash zone & riverbed.
Above water & flat zone:
Priming:
1 coat of Epilux 610 Primer (for steel) / Epoxy MIO
1 coat of Epilux 155 Primer (for timber)
Finish Coat:
2 coats of Epilux 4 Enamel
066
JAPAN BLACK
This is commonly known as Black Japan, mostly used in carriage & automotive
underbodies. This is generally made of a combination of asphaltum, a suitable
resin varnish & solvent.
Painting:
The surface should be dry and free from rust & dusts
Apply 2 – 3 coats of Bituminous Black with a time interval of minimum 24 hrs.