VITREOUS ENAMELLED SURFACES
A surface finish applied usually to metals by the fusion of selected inorganic
substances. Provides a very hard glass-like surface.
Wash down all areas with a detergent solution to remove all dirt and grease.
Abrade with-or-dry abrasive paper. Wash down with clean water all dirt and
residues. To ensure that the surface is grease free wipe over the surface with T-
6 thinner using a fresh clean clothe.
If required spot prime with Robb. Red Oxide Primer followed by 2 coats of
Robbialac Supper Gloss Synthetic Enamel.